Aerial Installation Solutions

Rent or Lease Lashers, Aerial Solutions and more.

Showing all 4 results

  • SKU:

    Our compact Model C2 Cable Lasher is perfect for lashing smaller diameter aerial cables to supporting strand with stainless steel lashing wire. The new design improvements make the C2 equally suited for new construction or overlashing up to its full 1 7/8 in. bundle capacity.

    • Lashes single or bundled cables up to 1 7/8 in. (46mm) onto strand sizes 1/4 in. to 3/8 in. (6-10mm) diameter
    • New style strand lock swings out of the way for unobstructed overlashing
    • Simple wire routing yields either “normal” or “loose” wire tension
    • Dual wire magazines for loading two coils of stainless steel lashing wire
    • Typical wire dimensions: 1200 ft. x .045 in. (365 m x 1.1mm) or 1600 ft. x .038 in. (487m x 1mm)
    • Lightweight and compact: Unloaded weight 35 lbs. (16kgs.); only 10 in. O.D. x 18.5 in. long (25 x 47cm). The C2’s tapered housing eases passage through treed areas
    • The C2 Cable Lasher is furnished with a 6 ft. (1.6m) bridle rope with snap hooks, an instruction manual and a rugged, lightweight storage chest
    • The C2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe
    • Like all GMP lashers, the C2 is built to last for many years of service. Components are CNC machined from alloy steel, stainless, bronze and aluminum castings to exacting tolerances and treated to withstand corrosion. Gear drives and sealed bearings assure maximum durability with minimal maintenance.
  • SKU: 000-030-051x, 000-030-050x, 000-030-069x, 000-030-070x, 000-030-071x

    Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Accommodates single or multiple aerial cables up to 3″ (76 mm) diameter across on any suspension strand from ¼” (6 mm) to 7/16″ (11 mm).

    •  Each of two recessed magazines will hold a 1200 ft. coil of .045” (1.1 mm) lashing wire (or 450 ft. of .065″). The Lashing Wire is fully recessed and covered by a gate.
    • A fast setup procedure, quick coil loading, and automatic drum lock for easy span transfers and smooth forward travel
    • Simple to use: Simply push down on the strand roller knob, rotate it a quarter turn and you can lash additional cables together on previously lashed cable
    • Designed for Durability: Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
    • The lasher is furnished with a rugged lightweight storage chest with corrosion resistant hardware, recessed latches and a moisture-proof, tongue-in-groove design for maximum protection when not in use
  • SKU: 000-030-048x

    Specially made lasher – has no strand lock and has a removable face capable of large bundle overlashingStrand Lock has been removed and the opening has been enlarged to prevent cable from rubbing on the housing including a removable front handle to aid in moving the lasher around a pole.

  • SKU: 000-030-017x

    Pull type cable lasher for tough jobs, especially in dusty, wet or icy conditions. Lashes single or multiple cables up to 3″ outside diameter and for single and double overlashing.

    Transfer time around poles is cut by as much as one-third, with the wire quick release trigger mounts below the handle for easy, one-hand engagement and release for continuous lashing.

    A key feature is that the Lineman™ requires no strand traction to drive rotation – this means you can now lash in any weather. The tough, precision drive system needs no adjustment and delivers even lashing action. The strand brake keeps wire tight prevents the lasher from sliding backward when forward motion is halted.

    Holds up to 1200 ft. per coil of 0.045″ lashing wire without reloading, and works compatibly with up to 1/2″ strands. A flat base ensures the lasher won’t roll around in transit, and the ergonomic handle and controls add to total precision performance.

    • Max Strand: 1/2″
    • Max Lash: 3 da.
    • Wire Size: .045″
    • Spool Size: 1,200 ft/coil
    • Overall Dimensions: 19-1/2” X 12” X 12”
    • Weight: 38 lbs.

Showing all 4 results

  • Contact Millennium Leasing:

    An expert salesperson will contact you shortly

        • This field is for validation purposes and should be left unchanged.

        1-2 DAY SERVICE:

        Missouri | Texas | Georgia | Oregon | Wisconsin | Illinois | Indiana | Ohio | Michigan | Minnesota | Iowa | Utah

        Top