Lashers & Lashing Wire

Cable Lashers for lashing to strand or overlashing cables

Showing all 11 results

  • SKU: 000-030-101x
  • SKU: 000-030-087x

    The Compact Model C2 Cable Lasher is perfect for lashing smaller diameter aerial cables to supporting strand/messenger with stainless steel lashing wire. The new design improvements make the C2 equally suited for new construction or overlashing up to its full 1-7/8″ bundle capacity.

    Upgraded strand lock swings out of the way for unobstructed overlashing.
    Simple wire routing yields either normal or loose wire tension.
    Dual wire magazines for loading two coils of stainless steel lashing wire.
    Tapered housing eases passage through heavily forested pathways.
    The C2 includes a 6 ft. bridle rope with snap hooks, an instruction manual and a rugged, lightweight storage chest.

  • SKU: 000-030-080x

    The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary. The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-084x

    The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary. The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-085x

    The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary. The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-088x

    The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. The J2 will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-091x-1

    The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. The J2 will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-091x

    The Model J2 Cable Lasher is used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire. The J2 will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-048x

    In response to customer’s requests, GMP developed a J2 derivative, that’s capable of large bundle overlashing. We’ve removed the strand lock and enlarged the opening to prevent cable from rubbing on the housing. Included is a removable front handle to aid in moving the lasher around a pole. Will lash any single or multiple aerial cables up to 3 in. (76mm) diameter across on any suspension strand from 1/4 in. (6mm) to 7/16 in. (11mm). A factory modification will allow the lasher to accommodate 1/2 in. (12.7mm) strand if necessary.

  • SKU: 000-030-017x

    The Lineman™ Lasher is the pull type cable lasher for tough jobs, especially in dusty, wet or icy conditions. Use it to lash single or multiple cables up to 3″ outside diameter and for single and double overlashing.

  • SKU: 600-210011

    Stainless steel lashing wire used to secure the cable to strand.

    Manufactured to standards that allow it to be used in the GMP and other lashing equipment with appropriate wax to keep your job moving.

    Specs:

    • .038T302
    • 1600′ Coil
    • Ships in multiples of 6
    • Price per coil

Showing all 11 results