The Hydraulically Limited Cable Puller is designed to offer exceptional value while providing critical speed control and overload protection. It is simple to set up and easy to operate. Our Cable Puller has all of the features contractors demand, plus GMP quality and durability you can rely on . . . year after year.
Adjustable pull control, up to 1000 lbs. (453kg) maximum on a 40 in. (101cm) diameter capstan
Speeds up to 425 ft/min @ 15 gpm flow
Control panel with pressure gauge, pressure adjustment knob and directional foot control valve
1/2 in. (12.7mm) non-spill quick-disconnect fittings for 2500 psi maximum hydraulic source input
Three versatile set up options are available: Self-Support, Vehicle Receiver Mount and Socket Mount
Portable Hydraulic Power Source that provides 8 gpm @ 2000 psi with 20 feet (6 m) of hydraulic hose
The MicroDrive is the newest offering in our line of drill-powered blowing machines
Cable Size: 0.142 in., 0.150 in., 0.177 in. (3.6, 3.8, 4.5mm)
Tube Size: (OD) 0.335 in., 0.500 in. (8.5, 12.7mm)
Cable Speed: 0-300 ft/min (0-90 m/min)
Maximum Air Pressure: 220 psi. (15 bar)
Power Requirements: Variable Speed Drill with adjustable torque
Dimensions: (height x length x width) 6.6 in. x 5.6 in. x 9.7 in. (169mm x 143mm x 248mm)
The Mini/Blower Pusher is the lightweight, low-cost, portable solution for istallation of fiber cable. Designed for shorter runs, in the “last mile” section of a difficult installation and is driven using a cordless, corded or pneumatic drill.
The unit can install fiber optic cables with diameters from 0.23″ (5.8mm) to 0.5″ (12.7mm) into microduct, 10mm to 18 mm or traditional duct from 0.5″ (12.7mm) to 1.5″ (38.1mm). The unit can be further configured to push/install duct rod into conduit and inner duct.
