The Single Size Junction Box comprises an aluminum base and lid that form a pressurized air chamber into which one end of an existing occupied innerduct can be attached. The existing cable can exit the box through an opening that has 3 cable seal slots, one of which will house the seal to suit the size of the existing cable. Works with 1.25″, 1.50″ and 2.00″ duct Sizes
Tornado Fiber Blower is designed to be safe, fast and effective, even on tough terrain. Move fiber optic cable of 0.23 to 1.25 in. (5.84-32 mm) diameter at speeds up to 300 ft./min. (90 m/min.) into preinstalled inner duct or direct-buried duct. Accommodates inner duct from .47 to 2.48 in. (12-63 mm).
The Whisper is best utilized with Drop and Micro Cables. The Whisper uses compressed air to install the cable. The rollers, powered by most types of cordless drills (not included), control the microfiber as it is propelled into the microduct.
Specifications:
Cable Diameter: 3 to 8.5mm and various manufacturers flat drop
Tube Size (Outside Dia): 4 to 18mm
Cable Speed (Adjustable): 0-300 ft/min (0-90m/min)
Max Air Pressure: 220 psi (15 Bar)
Power Requirement: Variable Speed Drill
Width: 8.1 in. (206mm)
Length: 9.7 in. (246mm)
Height: 8.5 in. (216mm)
The Mini/Blower Pusher is the lightweight, low-cost, portable solution for istallation of fiber cable. Designed for shorter runs, in the “last mile” section of a difficult installation and is driven using a cordless, corded or pneumatic drill.
The unit can install fiber optic cables with diameters from 0.23″ (5.8mm) to 0.5″ (12.7mm) into microduct, 10mm to 18 mm or traditional duct from 0.5″ (12.7mm) to 1.5″ (38.1mm). The unit can be further configured to push/install duct rod into conduit and inner duct.